Ruian City wins Thai company specializing in the development and production of nano-ceramic agents, the use of advanced technology, the silane film pale golden yellow to light blue (with metal material, roughness, processing time related) organic-inorganic hybrid layer ceramic structure, in the metal interface to form a strong Si-O-Me-covalent intermolecular bond layer coatings can be formed with excellent adhesion. Suitable for powder, paints and electrophoretic coating, the indicators meet the state standards.
Nano Tao agent does not contain heavy metals, no phosphorus, no heating, micro slag, the processing time is short, easy to control, can be co-linear processing iron, galvanized steel, aluminum, magnesium alloy variety of substrates and other advantages. Is the ideal product to replace the traditional phosphate.
Product Name: Nano Tao agent (liquid)
Packing: 25 kg / barrel
Nano Tao agent treatment process:
A pre-skimmed - Main skimmed - washing - washing - Tao processing - washing - Electrophoresis
Second, pre-skimmed - Main skimmed - washing - washing - Tao processing - washing - drying - powder or paint
Remarks:
1, the proposed front two degreasing, if only a degreasing, degreasing agents can improve concentration or increasing the temperature or extended degreasing time to get completely grease-free surface to be treated, degreasers recommended to use phosphate-free products. Can be considered acidic skim the surface smudge if more serious when the product details, please consult our company.
2, vitrified reprocessing spent ion pure water as possible, such as after-treatment requirements in general, can also be used tap water. (Water required test confirmed)
Nano-built pottery agent slots:
A former tank built tank to ensure clean, no residue residue, no dirt or other chemical residues. Check there is no clogging of the nozzle, the angle is correct.
Second, measuring tank volume, inject water in the tank.
Three per 1000 liters tank volume to add 30 kg Tao agent
Bath parameters:
Preparation ratio: 3%
Bath temperature: room temperature
PH: 3.8 ~ 5
Total acidity: 0.4 ~ 0.8pt
Conductivity: 350 ~ 700μs / cm (water included)
Tao processing time: Spray 1 to 5 minutes, soak 5 to 10 minutes, 3 to 5 minutes dive
Spray pressure: 1.0 to 1.5 kg
Nano-ceramic bath control agents:
1, PH value: paper soaked with a precision of a second compared with the color card in the bath, read out the PH value, the process of using the bath concentration, bath PH value increased when the bath is less than 5.0 on the need Add vitrified liquid, adjust the PH to set the parameters for each ton decreased by 0.1 bath PH want to be added vitrified liquid 5 kg, using a few times to add or continuous dropping.
2, pottery agent on the water quality requirements: preparation and rinsing bath water conductivity <260, try using deionized water.
3, if the processing of the workpiece for steel parts, ferrous ions accumulate in the post-treatment period, the appearance of yellow bath, available in addition to iron 15ml / ton to clear, detailed methods, please consult the technical staff.
4, bath filtration equipment required for processing or high sedimentation tank.
5, the operating parameters of each production line set different, set to adapt the production line is the most suitable conditions, please try to use a value close to manage this condition.
6 For a more detailed technical information, please consult the technical staff.
Device Requirements:
All contact Dow agent equipment are asked to use stainless steel (304 or 316) or with a fluoride-resistant lining for hard PVC or PE. Do not use cast iron tank.
Wastewater treatment
After this pharmaceutical treatment of wastewater generated does not contain heavy metal ions, subject to and in treatment, discharge and dealt with accordingly in accordance with local regulations.
Storage and Environmental Protection:
A storage temperature requirements between 5-45 ℃
2, the goods in the transport as a general chemical treatment
